Wallbox Pulsar Plus Type 2, 7.4kw, 5m, Black Bundle with CT Clamp for Power Boost (load management device) Next

Easee One Type 2 7kw charger - White Previous

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Pulsar Plus Type 2 5m 7.4kW

Be the first to review this product

£737.00

In stock

SKU

PP2-7.4-5-B

Charging power up to 7.4kW (1 Phase)

5m integrated charging cable

Compatible with all Type 2 electric cars

Wifi & Bluetooth connectivity

Built In Earthing BS 7671:2018 - 722.411.4.1(iv)

Payment options from Paypay, Visa, Mastercard, Klarna just to name a few....

Pay 3 installments of @@@ over 60 days. No interest. No fees.

1st Payment

@@@

30 Days later

@@@

60 Days later

@@@

free shipping

Hassle Free Returns

Free UK Wide Installation Service t&c’s apply

Details

Connector type	Type 2
Maximum current	32 A
DC Leakage protection Included	Yes
User interface	myWallbox Portal, Wallbox App
Overvoltage Category	CAT III
Storage temperature	From -40ºC to 70ºC
RCCB	Requires an external RCCB
Nominal frequency	50 Hz / 60 Hz
Degree of protection	IP54 / IK08
Operating temperature	From -25 ºC to 40 ºC
Input voltage	110 / 230 V AC ± 10% (1P) / 400 V AC ± 10% (3P)
Included features	Power Sharing Smart
Dimensions	166x163x82mm
Charging power	7.4kW
Charging mode	Mode 3
Charger status information	Halo RGB LED, Wallbox App, myWallbox Portal
Cable length	5m
Other details	Built In Earthing BS 7671:2018 - 722.411.4.1(iv)

More Information

More Information
Manufacturer	Wallbox
Color	Black

Write Your Own Review

Date Picker

day date
month
month

AM PM

day date
month
month

AM PM

day date
month
month

AM PM

day date
month
month

AM PM

day date
month
month

AM PM

day date
month
month

AM PM

day date
month
month

AM PM

Domestic Installation

Standard Installation £0.00

( Including Electric Vehicle Homecharge Scheme Government Contribution )

Up to 15 metres of cabling run externally
Connection at your consumer unit or meter position
Fitting of Surge protection where required
Fitting of current limiting clamp and wiring upto 15 metres between charge point and meter, additional accessories to charge point required in some cases
Fitting of cable holders/cradles if applicable
Connection and commissioning via local WiFi network
Test and inspection of the installation

We will fully install and commission your single phase charger upto 7.4Kw to include the running of a cable fixed on the outside of your property upto 15 metres at a maximum height of 2.8 metres, the fitting of a separate consumer unit within your property or external meter box (unless existing consumer unit allows for direct connection), the fitting and connection of your charge point to a wall and accessories where applicable,the fitting of an functional isolation switch, the fitting of a surge suppressor where risk assessment calculations deems it advisable to protect the system from transient over voltage of atmospheric origins,connection and set up of current transformer clamp to monitor Installation loading, electrical installation test and inspection of the work carried out, commissioning and demonstration of the charge point,claim of the grant on your behalf, electronic copies of test certification and building control notice, notification to your distribution network operator.Please note where required main equipotential earth bonding must be fitted, the electricity supply & meter must meet minimum required standards, any extraneous metalwork within touching distance of your EV parking space must be insulated or terminated to the same earthing system as the charge point, steady WiFi signal is required at the charge point location to -68dBm or superior, please ensure charge point has curtailment option or you have purchased management device where needed *90% of installs will require load management. Any additional required work can be discussed on site and a free estimate supplied valid for 90 days.

If on your day of installation Incorrect or False claims of OZEV eligibility are discovered it will incur a cost of £100 and works will cease or be cancelled.
An appropriate adult must be present on the day of the installation to enable commissioning, access to the property and demonstration of the charge point.
If additional work is required outside of our standard scope of works it will either be carried out by our engineer on site at an hourly rate of £40 (Exclusive of materials & time permitting).
Alternatively if additional work is deemed too much to be carried out on the day it will be discussed and an estimate provided valid for 90 days. (Our engineers will always consult with you prior to any additional work and seek confirmation from you)

Get your INSTANT quote now!

Click Here

Pulsar Plus Type 2 5m 7.4kW

@@@

@@@

@@@

Free UK Wide Installation Service t&c’s apply

UK wide

superEV approved installer network

offering free installation t&c’s apply

Get your INSTANT quote now!

Click Here

Pulsar Plus Type 2 5m 7.4kW

Fixed price quote - click here

@@@

@@@

@@@

Free UK Wide Installation Service t&c’s apply

UK wide

superEV approved installer network

offering free installation t&c’s apply

Date Picker

Date Picker

Domestic Installation

Domestic or commercial

Domestic Government Grant

AM I ELIGIBLE FOR THE OZEV GRANT SCHEME?

Commercial Government Grant

Qualifying OZEV Grants

Service Plan

Booking Date